Increased yield polyurethane mounting foam. Suitable for work from -10°C to + 30°C. Used in the installation of window frames, door frames, heat and sound insulation, sealing of joints, filling of voids and cracks, gluing of roof tiles and thermal insulation. Foam prevents the formation of mold. Hardened foam has good heat and sound insulation properties. Yield up to 65 liters with free-blowing. Secondary expansion 80 %. Thermal resistance 0.036 W / (m * K). Thermal resistance after hardening -50°C … + 90°C. Cutting time 40 min. Full hardening time is 24 hours. Sound attenuation index 61 dB.
Users manual - thoroughly clean and moisten the work surface. Shake the vial vigorously and screw on the gun. Invert the vial with the valve facing down. To adjust the mounting foam spray flow, rotate the valve on the back of the gun handle. Fill the cavity with foam. If the foam is used at low temperatures, the vial must be warmed to + 18°C by placing it in warm water or a warm room. Do not wet the surface at air temperatures below 0°C. Residues of undried foam are best cleaned with Foam Cleaner Fome Flex. Remove hardened foam mechanically.
Store upright in a dry place at a temperature of +5°C to + 25°C. Shelf life - 18 months from the date of manufacture, in accordance with the storage rules. Protect the vials from direct sunlight and heat above 50°C. Quantity in the box - 12 pcs. Quantity on the pallet - 672 pcs. The weight of one vial is 0.978 kg. Transport temperature <-20°C up to 4 days; 19°C ÷ -10°C for up to 7 days; -9°C ÷ 0°C for up to 10 days.
