All-season polyurethane foam adhesive used with a foam gun. Application temperature from -10°С to +30°С. Suitable for gluing thermal insulation boards, lightweight polystyrene constructions, as well as for sealing joints, water supply insulation, sound insulation of bath and shower enclosure soles, sealing of roofs and attics. Does not deform structures. Glues and seals. Excellent adhesion to polystyrene, concrete, brick, wood, PVC. Up to 8 m2 of thermal insulation boards can be glued with one vial. Insoluble in polystyrene. Hardens quickly. Small secondary expansion. After curing, polystyrene has thermal insulation properties. Tensile strength – 10 kg / cm2. Full hardening time 12 hours.
Users manual – thoroughly clean and moisten the work surface. Shake the vial vigorously and screw on the gun. Always keep the vial upside down during operation. To adjust the mounting foam spray flow, rotate the valve on the back of the gun handle. Spray the adhesive seam at a distance of 3 cm from the surface to be glued. After foaming, wait 1 minute and press the adhesive to the surface. Blow the foam glue over the entire perimeter of the board. If the perimeter of the panel is larger than 0.5 m2, cover with additional strips in the middle. Cutting time 11 minutes. Suitable for outdoor and indoor work. Thermal resistance after hardening -40°C … + 80°C.
Store upright in a dry place at a temperature of +5°C to +25°C. Shelf life – 18 months from the date of manufacture, in accordance with the storage rules. Protect the vials from direct sunlight and heat above 50°C. Quantity in the box – 12 pcs. Quantity on the pallet – 720 pcs. The weight of one vial is 0.780 kg. Transport temperature -5°C to +25°C
