FOME FLEX Hydroprotect Flex Pro Tape is resistant to hydrostatic pressure according to DIN 16726 and permeable to water vapor in accordance with DIN prEN 1062-2. It is used together with the waterproofing membrane FOME FLEX HYDROPROTECT. The waterproofing tape is immersed in the first layer of the waterproofing membrane and covered with the second. Sealing tape is tearproof, durable and resistant to many chemicals as well as to frost and UV radiation.
This tape is intended for additional reinforcement in places where deformational cracking is possible.
Also, it can be used in floor, wall and ceiling joints, internal and external corners and pipe transitions. Suitable for use together with a waterproofing membrane FOME FLEX HYDROPROTECT.
Surface preparation
The surface should be clean, smooth, dry, free of grease, mechanical damage and other particles that reduce adhesion.
Application
The product is ready to use. Prime the surface. Wait until it dries. Then apply the first layer of FOME FLEX HYDROPROTECT waterproofing membrane on the surface. Cut an appropriate length of FOME FLEX HYDROPROTECT FLEX PRO TAPE and dip it into the first layer of applied membrane. Press firmly against the surface so that there are no wrinkles and the membrane is fully absorbed into the tape. Apply a second layer of membrane over the submerged tape to completely cover the tape. Apply the membrane to the tape with a roller, brush or trowel.
The product is packed in 10 and 25 m long rolls. Store in a dry, cool and closed space.
